Discussion:
Carrier 58hdv100
(too old to reply)
chackachacka
2012-03-19 20:25:30 UTC
Permalink
Hello,

I installed a new furnace to my house. It works fine, but when the
thermostat isn't calling for heat,
the blower motor is making a noise. The noise is like a flourescent
ballast. Is this normal? Also the
LED blinking bright and dim but cant find what it means. All I know is
that theres a code problem.
Can someone tell me what the problem is? I cant find any installation
guide for this particular model
Eli
-------------------------------------
Thanks
Grumpy
2012-03-19 21:40:47 UTC
Permalink
Call Carrier thec. whatever it is, you need someone that is well familiar
with that make and model.
to me it sound that control does not fully shouts off on fan portion
of control.
Post by chackachacka
Hello,
I installed a new furnace to my house. It works fine, but when the
thermostat isn't calling for heat,
the blower motor is making a noise. The noise is like a flourescent
ballast. Is this normal? Also the
LED blinking bright and dim but cant find what it means. All I know is
that theres a code problem.
Can someone tell me what the problem is? I cant find any installation
guide for this particular model
Eli
-------------------------------------
Thanks
Steve
2012-03-19 22:12:30 UTC
Permalink
Post by chackachacka
Hello,
I installed a new furnace to my house. It works fine, but when the
thermostat isn't calling for heat,
the blower motor is making a noise. The noise is like a flourescent
ballast. Is this normal? Also the
LED blinking bright and dim but cant find what it means. All I know is
that theres a code problem.
Can someone tell me what the problem is? I cant find any installation
guide for this particular model
Eli
-------------------------------------
Thanks
You need to call the competent, licensed, insured, professionally trained
installer that put it in to diagnose and correct the problem. BTW... Most
manufacturers warranties are null and void on all equipment that are
purchased on the internet, and/or that are not installed by a licensed
professional.
i***@gmail.com
2012-03-20 14:33:32 UTC
Permalink
Post by chackachacka
Hello,
I installed a new furnace to my house. It works fine, but when the
thermostat isn't calling for heat,
the blower motor is making a noise. The noise is like a flourescent
ballast. Is this normal? Also the
LED blinking bright and dim but cant find what it means. All I know is
that theres a code problem.
Can someone tell me what the problem is? I cant find any installation
guide for this particular model
Eli
-------------------------------------
Thanks
Often, the diagnostic codes are listed on the backside of the front
furnace panel (s) . But youre going to need a Tech to do the repair
with part, if required.
HVAC
2012-03-21 17:22:26 UTC
Permalink
Post by chackachacka
Hello,
I installed a new furnace to my house. It works fine, but when the
thermostat isn't calling for heat,
the blower motor is making a noise. The noise is like a flourescent
ballast. Is this normal? Also the
LED blinking bright and dim but cant find what it means. All I know is
that theres a code problem.
Can someone tell me what the problem is?
Shut the unit down ASAP, else it will explode.





Have a nice day! :-)
--
"OK you cunts, let's see what you can do now" -Hit Girl

Stormin Mormon
2012-03-21 18:49:26 UTC
Permalink
Now, that's a timely diagnoisis. I hope you caught it in time.

Christopher A. Young
Learn more about Jesus
www.lds.org
.
Post by chackachacka
Hello,
I installed a new furnace to my house. It works fine, but when the
thermostat isn't calling for heat,
the blower motor is making a noise. The noise is like a flourescent
ballast. Is this normal? Also the
LED blinking bright and dim but cant find what it means. All I know is
that theres a code problem.
Can someone tell me what the problem is?
Shut the unit down ASAP, else it will explode.





Have a nice day! :-)
--
"OK you cunts, let's see what you can do now" -Hit Girl
http://youtu.be/CjO7kBqTFqo
Daniel who wants to know
2012-03-22 00:09:28 UTC
Permalink
Post by HVAC
Shut the unit down ASAP, else it will explode.
Have a nice day! :-)
Cute, but on the Honeywell control board in my Quatro True Blue 90
alternating bright/dim is normal operation per the error code sticker.
Obviously this doesn't mean that bright/dim is normal for all makes and
models.
PaxPerPoten
2012-03-22 00:11:18 UTC
Permalink
Post by HVAC
Post by chackachacka
Hello,
I installed a new furnace to my house. It works fine, but when the
thermostat isn't calling for heat,
the blower motor is making a noise. The noise is like a flourescent
ballast. Is this normal? Also the
LED blinking bright and dim but cant find what it means. All I know is
that theres a code problem.
Can someone tell me what the problem is?
Shut the unit down ASAP, else it will explode.
We can always send Ibebauk out to pray over it and Stormy to do a laying
on of the hands. When you tire of the constant drone from those
two..Call a good service company.
Post by HVAC
Have a nice day! :-)
Kennykt
2018-12-06 20:44:03 UTC
Permalink
replying to chackachacka, Kennykt wrote:
It sounds to me like you’re hearing the hum of a transformer inside the
furnace but I would get it checked by a local professional. And the
“heartbeat” signifies that the control has 24v (normal operation no call
for fan)

--
for full context, visit https://www.homeownershub.com/hvac/carrier-58hdv100-45859-.htm
Loading...